Vogels VFW130-SI - Wall support for VESA LCD 11-30 inch up to 30kg weight, 1 pivot point, tiltable, 10 degrees vertical
The horizontal and vertical distance between the mounting points on the back of a screen are described like this. A 200x100 interface measures 200mm horizontally between the fixing points and 100mm vertically.
|
Specifications
|
|
Max Interface Height
This is the maximum vertical distance in mm between the mounting screws. The bracket will not accommodate screens that have a larger vertical interface than this.
|
100 mm
|
|
Min Interface Height
This is the minimum vertical distance in mm between the mounting screws. The bracket will not accommodate screens that have a smaller vertical interface than this.
|
75 mm
|
|
Max Interface Width
This is the maximum horizontal distance in mm between the mounting screws. The bracket will not accommodate screens that have a larger horizontal interface than this.
|
100 mm
|
|
Min Interface Width
This is the minimum horizontal distance in mm between the mounting screws. The bracket will not accommodate screens that have a smaller horizontal interface than this.
|
75 mm
|
|
Max Screen Size
This is the maximum recommended screen size.
|
30 Inches
|
|
Min Screen Size
This is the minimum recommended screen size.
|
10 Inches
|
|
Max Weight
This is the maximum weight of the screen and other equipment that the manufacturer recommends should be supported from this bracket. This figure assumes that the bracket has been mounted to an adequately structure with appropriate fixings.
|
30 Kg
|
|
Mechanism
This descibes the type of movement or articulation that the bracket is capable of.
|
Tilt
|
Tilt
This is the angle in degrees that bracket can tilt. This shows the total range of vertical movement of the bracket interface. Some large screen may inhibit the full range of movement.
|
+10°
-0°
|
|
Colour
This is the main colour of the bracket.
|
Silver/Aluminium
|
